 |
 |
|
Click2Enter Active Training Link: Click Here
Download
a copy of the System Setup Guidelines Guide For The Public Safety Official.
Download
the Click2Enter I Brochure in PDF format.
Download
a copy of the Click2Enter enclosure Pole Mounting Kits in MS Word format.
Download
a copy of Click2Enter Operator's & Installer's Guide: Version 3.0, Software Version 1.17 (Adobe Acrobat PDF format).
Click2Enter-I Technical Description Click2Enter-I takes advantage of state of the art electronics presently being designed into scanner radio technology. This modified scanner/radio technology provides public safety agencies with a quick, safe, reliable, and stealthy means to activate gates, bollards, doors, or any security control mechanisms. Public safety agencies, such as Fire Departments, Police/Sheriff Departments, and Ambulance/Rescue Companies are issued radio frequencies by the FCC for their restricted use only. Possession of transmitting devices for non-authorized personnel is tightly controlled and transmitting on these frequencies is against the law (Federal & State statutes). The public's right to receive these emergency agency communications is not restricted, thus it is legal to possess emergency response scanning devices. The Click2Enter-I combines the scanner/receiver technology with control technology to act as a radio controlled key to open access control devices (gates or security control mechanisms), thus allowing public safety agencies or any authorized users immediate access to deal with emergencies as they occur. To activate the Click2Enter-I the operator must be proximate to the device, and using short transmission pulses of their radio transceiver (software enabled one or two pulse mode) is all that is required to initiate an instant activation/entry. The Click2Enter-I uses technology that is inherent in most all radio broadcast equipment and adapts this technology to work as a control mechanism. We increase the security of the Click2Enter-I by requiring a verification of the FCC assigned carrier frequency and the agency assigned sub-audible communication (private line code). So it takes two separate verifications to effect an activation of the device. Click2Enter-I stores a running activation log, in memory, for operator recall. The Click2Enter system allows any public safety agency or authorized users access, as long as they are programmed into it's memory. Having the ability to program in multiple users answers the mutual aid problem that presently exists with other emergency access control products. Programming of the Click2Enter-I is accomplished by way of an RS-232 computer interface, so any computer or similar device using standard modem protocol software can be used. Several more unique and desirable features are designed into each Click2Enter-I; please refer to the features list above for more details. The entire activation sequence takes less than four seconds. The operator can be either on foot (using a portable radio), or in a moving vehicle (using portable or mobile radio)-It's as easy as:
Click2Enter Active Training Link: Click Here
Innovative, cutting edge, reliable, flexible, safe, quick, easy to use are just some of the many ways to describe the Click2Enter-I. The Click2Enter-I will revolutionize the emergency access industry and set the standard for many years to come. The Click2Enter-I has been on the market for well over four years with many satisfied customers. None of the other products, presently being marketed in this field, compare to the Click2Enter.
Important
Announcement: Click2Enter-II Coming Soon
For the highest
level of security available watch for the future release of the
Click2Enter-II. This innovative new product is presently being designed
to provide an even higher level of security affording public safety
or any authorized user immediate entry via; electronically controlled
foyer entry doors; security doorways; lock key boxes etc. The Click2Enter-II
will use state of the art encrypted radio transceiver communication
transmissions. The same operating procedure will apply to the Click2Enter-II
as with the Click2Enter-I. This encrypted technology will make the
Click2Enter-II the ultimate security controlled doorway access device.
Photos of
Click2Enter-I Installations
Photos of the
Click2Enter-I being tested and evaluated on the new security fence
by the United States Border Patrol, San Diego California Sector The following five
photos depict the Click2Enter-I at a typical gate installation. The following six photos
depict helicopter and fixed wing aircraft using the Click2Enter-I to operate
runway gates at Stead Army Air Base in Reno Nevada. Another use for the
Click2Enter-I is depicted in the following photos of the Oxnard, California
Police Department operating their sally-port with it. The following three
photos are provided courtesy of the Santa Maria California Fire Department.
These photos depict the many different access control devices they are required
to use to gain access to the gates in their city. The access control devices are
clipped to the fire engine sun visor. Note the duct-tape holding the visor from
falling down. This is another great reason to use the Click2Enter system.
|
